Cisco SN 5428 Storage Router
Domain ID Configuration
QL
OGIC SWITCH INTEROPERABILITY GUIDE PAGE 75
V
ERSION 1.0, MARCH 2003
Domain ID Configuration
To ensure that there are no conflicts between switches, we recommend that each switch have an
assigned Domain ID. The following steps show how to set the Domain ID on both the Cisco switch
and the QLogic switch.
Cisco SN 5428 Management Interface
1. Start the Cisco SN 5428 Management Interface. The Cisco Storage Network 5428 Storage
Router dialog box displays.
2. From the Cisco Storage Network 5428 Storage Router dialog box, do the following:
a. Select the primary link Configuration.
b. From the function link System, click FC Interface.
c. In the Global Information Domain ID box, type or edit the Domain ID as appropriate.
d. Select the Global Information Domain ID Lock check box.
e. Click Apply.