Filter
Top Products
QLOGIC SWITCH INTEROPERABILITY GUIDE PAGE 3
V
ERSION 1.0, MARCH 2003
Supported Switches and Firmware Versions
The following QLogic switches have been tested in the QLogic environment and comply with the
FC-SW-2 standard.
The QLogic switches have been tested interoperable with the following switches from Brocade,
Cisco, IBM, INRANGE, McDATA, and Sun that comply with the FC-SW-2 standard. See the
referenced page for detailed instructions on merging QLogic fabrics and these fabrics.
QLogic Supported Switch and Firmware Versions
Switch Model Firmware Version
SANbox2-8 Switch 1.3.x and above
SANbox2-16 Switch 1.3.x and above
SANbox2-64 Switch 1.5.x and above
Brocade, Cisco, IBM, INRANGE, McDATA, and Sun
Supported Switch and Firmware Versions
Manufacturer Switch Model Firmware Version
Brocade (see page 7) SilkWorm 3200 Switch 3.0.2g and above
SilkWorm 3800 Switch 3.0.2g and above
SilkWorm 3900 Switch 4.0.2c and above
SilkWorm 12000 Switch 4.0.2c and above
Cisco (see page 71) SN 5428 Storage Router 2.3.1-k9 or above
MDS 9216 Switch 1.0(1) [build 1.0(0.281)]
MDS 9509 Director 1.0(1) [build 1.0(0.281)]
IBM (see page 119) IBM eServer BladeCenter Fibre Channel
Switch Module
1.4.0.35.00 or above
INRANGE (see page 147) FC/9000 Switch Code set 3.0.3.2 or above
McDATA (see page 181) Sphereon 4500 Switch 04.01.00 12 and above
Intrepid 6064 Director 04.01.02.4 and above
Intrepid 6140 Director 04.01.02.4 and above
Sun (see page 261) Sun StorEdge Network 2 Gb FC Switch-8 1.3.x and above
Sun StorEdge Network 2 Gb FC Switch-16 1.3.x and above