Filter
Top Products
Cisco SN 5428 Storage Router
Domain ID Configuration
P
AGE 76 QLOGIC SWITCH INTEROPERABILITY GUIDE
VERSION 1.0, MARCH 2003
Cisco CLI
NOTE: Use the following CLI commands when the Cisco SN 5428 Management Interface is not
available.
ATTENTION!!
This procedure requires a reboot of the switch.
CISCO SN 5428 Storage Router
Password: *****
[Cisco_5428]$ ena
Enter admin password: *****
[Entering Administrator mode]
[Cisco_5428]# interface fc domainid <domain id>
[Cisco_5428]# interface fc domainid lock enable
*[Cisco_5428]# save all bootconfig