Filter
Top Products
IBM eServer BladeCenter Fibre Channel Switch Module
Operating Mode Configuration
QL
OGIC SWITCH INTEROPERABILITY GUIDE PAGE 143
V
ERSION 1.0, MARCH 2003
Operating Mode Configuration
NOTE: Perform the following steps only when connecting from a QLogic SANbox2-8 or
SANbox2-16 with version 1.3.xxx firmware.
IBM eServer BladeCenter SAN Utility
Not applicable.
IBM eServer BladeCenter Fibre Channel Switch Module CLI
Not applicable.
QLogic SANbox Manager GUI
1. Start the SANbox Manager application. The SANbox Manager—Faceplate dialog box
displays.
2. From the SANbox Manager—Faceplate dialog box Zoning menu, select Edit Zoning
Config.