Filter
Top Products
Brocade SilkWorm 3900 and SilkWorm 12000 Switches
Timeout Values
P
AGE 50 QLOGIC SWITCH INTEROPERABILITY GUIDE
VERSION 1.0, MARCH 2003
Brocade CLI
Fabric OS (cp1)
cp1 login: admin
Password: xxxxxxxx
Brocade12000:admin> configshow
Use the above command to verify that R_A_TOV is set to 10000 and E_D_TOV is set to 2000. If
these timeout values are not correct, continue with this section. If the settings are correct, no
changes need to be made; proceed with the next appropriate section.
Brocade12000:admin> switchdisable
Brocade12000:admin> configure
Configure...
Fabric parameters (yes, y, no, n): [no] yes
Domain: (97..127) [100]
R_A_TOV: (4000..120000) [10000]
E_D_TOV: (1000..5000) [2000]
Data field size: (256..2112) [2112]
Sequence Level Switching: (0..1) [0]
Disable Device Probing: (0..1) [0]
Suppress Class F Traffic: (0..1) [0]
VC Encoded Address Mode: (0..1) [0]
Per-frame Route Priority: (0..1) [0]
BB credit: (1..16) [16]
Virtual Channel parameters (yes, y, no, n): [no]
Zoning Operation parameters (yes, y, no, n): [no]
RSCN Transmission Mode (yes, y, no, n): [no]
NS Operation Parameters (yes, y, no, n): [no]
Arbitrated Loop parameters (yes, y, no, n): [no]
System services (yes, y, no, n): [no]
Portlog events enable (yes, y, no, n): [no]
Brocade12000:admin> switchenable
10 Brocade12000:admin> 987654321
fabric: Principal switch
fabric: Domain 100