Filter
Top Products
Cisco MDS 9000 Series Switches
Zone Configuration
P
AGE 114 QLOGIC SWITCH INTEROPERABILITY GUIDE
VERSION 1.0, MARCH 2003
Cisco CLI
NOTE: Use the following CLI commands when the Cisco Fabric Manager is not available.
login: admin
Password: ********
Cisco_9216# show zone vsan <vsan id>
Use the above command to verify that all zone members are specified by pwwn.
QLogic SANbox Manager GUI
1. Start the SANbox Manager application. The SANbox Manager—Faceplate dialog box
displays.
2. From the SANbox Manager—Faceplate dialog box Zoning menu, select Edit Zoning.
For the QLogic SANbox2-8 and SANbox2-16, the following displays: