Q-Logic SN0135524-00 Switch User Manual


 
Cisco MDS 9000 Series Switches
Zone Configuration
P
AGE 108 QLOGIC SWITCH INTEROPERABILITY GUIDE
VERSION 1.0, MARCH 2003
Cisco Fabric Manager
1. Start Cisco Fabric Manager. The Fabric Manager dialog box displays.
2. From the Fabric Manager dialog box left panel, do the following:
a. Select the VSAN/Zone tab.
b. Expand the VSAN to which you plan to connect the E-port.
c. Verify that the Zone Set names and Zone names conform to the standards discussed under
“Active Zone Set Names” on page 107 and are unique between the switches.
Cisco CLI
NOTE: Use the following CLI commands when the Cisco Fabric Manager is not available.
login: admin
Password: ********
Cisco_9216# show zoneset vsan <vsan id>
Use the above command to verify that all Zone and Zone Set names in the VSAN conform
to FC standards.