Filter
Top Products
Cisco MDS 9000 Series Switches
Zone Configuration
QL
OGIC SWITCH INTEROPERABILITY GUIDE PAGE 113
V
ERSION 1.0, MARCH 2003
Zone Types
All zone members must be specified by a world wide port name (WWPN) in order to comply with
Fibre Channel standards. Any zone member not specified by WWPN cannot participate in the
fabric. Below are steps to confirm the zone types.
NOTE: A world wide name (WWN) consists of a world wide node name (WWNN) and one or
more WWPNs. For Cisco, references to pwwn refer to the WWPN. For QLogic,
references to WWN refer to the WWPN.
Cisco Fabric Manager
1. Start Cisco Fabric Manager. The Fabric Manager dialog box displays.
2. From the Fabric Manager dialog box left panel, do the following:
a. Select the VSAN/Zone tab.
b. Expand the VSAN to which you plan to connect the E-port.
c. Verify that the zone member names conform to the standards discussed under “Active Zone
Set Names” on page 107 and are unique between the switches.