Renesas M16C/6NM Network Card User Manual


 
Rev.2.00 Nov 28, 2005 page 56 of 378
REJ09B0124-0200
M16C/6N Group (M16C/6NK, M16C/6NM) 8. Clock Generating Circuit
Under development
This document is under development and its contents are subject to change.
8. Clock Generating Circuit
8.1 Types of Clock Generating Circuit
Four circuits are incorporated to generate the system clock signal:
Main clock oscillation circuit
Sub clock oscillation circuit
On-chip oscillator
PLL frequency synthesizer
Table 8.1 lists the clock generating circuit specifications. Figure 8.1 shows the clock generating circuit.
Figures 8.2 to 8.8 show the clock-related registers.
Table 8.1 Clock Generating Circuit Specifications
Item
Main Clock
Oscillation Circuit
Sub Clock
Oscillation Circuit
On-chip Oscillator
PLL Frequency
Synthesizer
Use of Clock
Clock
Frequency
Usable
Oscillator
Pins to Connect
Oscillator
Oscillation Stop
and Re-Oscillation
Detection Function
Oscillation Status
After Reset
Other
CPU clock source
Peripheral function
clock source
0 to 16 MHz
Ceramic oscillator
Crystal oscillator
XIN, XOUT
Available
Oscillating
Externally derived clock can be input
CPU clock source
Clock source of Timer
A, B
32.768 kHz
Crystal oscillator
XCIN, XCOUT
Available
Stopped
CPU clock source
Peripheral function
clock source
CPU and peripheral
function clock sources
when the main clock
stops oscillating
About 1 MHz
-
-
Available
Stopped
-
CPU clock source
Peripheral function
clock source
16 MHz, 20 MHz,
24 MHz
(1)
-
-
Available
Stopped
-
NOTE:
1. 24 MHs is available Normal-ver. only.