Filter
Top Products
109
3. What to do if Something
Goes Wrong
If Your Machine does not Operate as You
Want
Message
Machine's Condition Problem/Cause Action
The machine instructs you
to wait.
The machine is warming
up.
Wait for the machine to
warm-up.
Reference
You can use Auto Start
mode during warm-up
period. See
⇒
P.60
“Au-
to Start—Entering Copy
Job Settings During the
Warm-up Period”
The machine cannot detect
the original size.
Improper original is set.
See
⇒
P.21
“Sizes Difficult
to Detect”
.
Set non-standard size orig-
inal on the exposure glass.
Input the both horizontal
and vertical sizes of the
non-standard original. See
⇒
P.29
“Setting Originals on
the Exposure Glass”
.
Select paper manually, not
in Auto Paper Select mode.
Do not use Auto Reduce/
Enlarge mode.
Original is not set. Set your originals.
The machine instructs you
to check the original direc-
tion.
There is no copy paper that
is the same direction as the
originals.
Set the original in the same
direction as the copy paper.
The machine instructs you
to check paper size.
Improper original size is
set.
Select the proper paper
size.
The machine cannot staple
this size paper.
-- Select the proper paper size
that can be used in Staple
mode. See
⇒
P.46
“Staple”