Filter
Top Products
Margin Adjustment—Adjusting the Margin
69
2
Margin Adjustment—Adjusting the Margin
You can shift the image either left or
right to make a binding margin.
Limitation
❒
If you set too wide margin, areas
you do not want to delete might be
erased.
Note
❒
You can change the width of the
binding margin as follows:
❒
The margin width default is as fol-
lows. You can change this default
setting with the user tools. See “3.
Marg.Adjust.Front” in
⇒
P.149
“2.
Adjust Image
1
/
2
”
.
A Press the
{
Menu
}
key.
Note
❒
If you have not changed the de-
fault setting, press the 3
{
Margin
Adjustment
}
key. Go to step C.
B Select the
[
Margin Adjust.
]
with the
<>
keys. Then, press the
[
Select
]
key.
C Select
[
Left
]
(left margin) or
[
Right
]
(right margin) with the
<>
keys.
D Enter the desired margin width
with the number keys.
Metric version 0 – 30mm (in 1mm
steps)
Inch version 0" – 1.0" (in 0.1"
steps)
Metric version • Front: 5mm
Left
• Back: 5mm
Right
Inch version • Front: 0.2" Left
• Back: 0.2" Right
A
A
ND2C0109
ND2C0105