Filter
Top Products
Sort/Stack/Staple
45
2
❒
To use the Rotate Stack function,
two paper trays identical in size
and different in direction (
KL
)
are required.
Reference
For the maximum tray capacity of
the optional finisher, see
⇒
P.46
“Staple”
.
A Press the
{
Sorter
}
key until the
Stack indicator (bottom) is lit.
B To make punch holes, press the
[
Punch
]
key.
Limitation
❒
The optional 3000-sheet finisher
and punch kit are required to
use this function (Type 2 only).
❒
You cannot make punch holes
with Rotate Stack.
Note
❒
If you do not wish to make
punch holes, go to Step D.
C Make sure that
[
ON
]
is selected.
Then, press the
[
OK
]
key.
D Enter the number of copies with
the number keys.
E Set your originals.
When setting a stack of originals
in the document feeder
A Set a stack of originals in the
document feeder, then press
the
{
Start
}
key.
After all the originals are
scanned, the copies are deliv-
ered to the tray.
Note
❒
The last page should be on
the bottom.
When setting an original on the
exposure glass
A Set an original on the exposure
glass, then press the
{
Start
}
key.
Note
❒
Start with the first page to be
copied.
B Set the next originals.
Note
❒
Set the original in the same
direction as the first one.
2
2
2
2
1
1
Sort
Staple
Stac
1-Sided 2-Sided
2-Sided 2-Sided
User Tools / Counter
Enhanced Au o Reduce/
Book 2-Sided
ND2L0101
ND2C0101
ND2C0104