Filter
Top Products
Copying
60
2
Interrupting during copying after all
originals have been fed
A Press the
{
Interrupt
}
key.
The Interrupt key lights.
Note
❒
Copying will not stop yet.
B Set your original.
C Press the
{
Start
}
key.
The machine stops the original job
and starts copying your original.
D When copying is complete, re-
move your originals and copies.
E Press the
{
Interrupt
}
key again.
The Interrupt indicator goes out.
F Press the
{
Start
}
key.
The previous copy job settings will
be restored and the machine will
continue copying from where it
left off.
User Codes
If the machine is set to use the User
Code function, operators must input
their user codes before the machine
can be operated. The machine keeps
count of the number of copies made
under each user code.
Note
❒
When the machine is set for user
codes, the machine will prompt
you for your user codes after the
power switch is on or the Auto Re-
set comes into effect.
❒
To prevent others from making
copies using your user code, press
the
{
Clear Modes/Energy Saver
}
and
{
Clear/Stop
}
keys simultaneously
after copying.
❒
You can set your user codes by
eight digits of number maximum.
Reference
For setting user codes, see
⇒
P.148
“1. General Features
4
/
4
”
.
See “18 User Code Manage” on the
System Settings.
Auto Start—Entering Copy
Job Settings During the Warm-
up Period
If you press the
{
Start
}
key during the
warm-up period, the
{
Start
}
key will
blink, and your copies will be made
as soon as warm-up finishes.
A Make any adjustments to copy
settings during the warm-up peri-
od.
B Set your originals.
C Press the
{
Start
}
key.
Copying automatically starts
when the
{
Start
}
key indicator al-
ternately flashes red and green and
the machine is ready for copying.
Note
❒
To cancel Auto Start, press the
{
Clear/Stop
}
key.
Original Beeper
The beeper sounds and an error mes-
sage is displayed when you leave
your originals on the exposure glass
for about two seconds after copying.
Note
❒
To cancel this function, see “06.
Original beeper” in
⇒
P.147
“1.
General Features
2
/
4
”
.