Filter
Top Products
Settings you can Change with the User Tools
149
4
2. Adjust Image
1
/
2
Reg. User Code You can register user codes.
Note
❒
Up to 50 user codes (8 digits or less) can be registered.
Chg/Del User Code You can change or delete user codes.
Note
❒
The number of copies made under the old code is added
to that made under the new user code.
❒
The number of copies made under the deleted code is
also deleted.
Counter List Print You can print a list of counters shown by user code.
Note
❒
To stop the printing, press the [
Cancel
] key.
Menu Description
1. Erase Border The default setting of the width of the erased margins in the
Erase Border mode can be changed as follows:
• Metric version: 3 – 50mm in 1mm steps
• Inch version: 0.1 – 2.0" in 0.1" steps
Note
❒
Default:
• Metric version:
10mm
• Inch version:
0.4"
2. Erase Center The default setting of the width of the erased margins in the
Erase Center mode can be changed as follows:
• Metric version: 3 – 50mm in 1mm steps
• Inch version: 0.1 – 2.0" in 0.1" steps
Note
❒
Default:
• Metric version:
10mm
• Inch version:
0.4"
Menu Description