Filter
Top Products
Copying
54
2
E Select the desired size with the
<>
keys, then press the
[
OK
]
key.
F Press the
[
Exit
]
key.
Note
❒
When copying onto OHP
transparencies or thick pa-
per.
⇒
P.54
“When copying
onto OHP transparencies or
thick paper”
E Set your originals, then press the
{
Start
}
key.
When copying onto OHP
transparencies or thick paper
To make copies onto OHP transpar-
encies or thick paper, you need to
specify the paper type.
Note
❒
Select
[
Thick Paper
]
if the paper
weight is more than 91g/m
2
(20
lb).
A If Duplex mode is selected, press
the
{
Duplex
}
key to cancel the
mode.
B Open the bypass tray, and adjust
the guides to the paper size.
Important
❒
If the guides are not flush with
the copy paper, a skew image or
paper misfeeds might occur.
C Lightly insert the OHP transpar-
encies or thick paper face down
until the beeper sounds.
The
k
indicator on the display is
automatically selected.
Note
❒
When you set a OHP transpar-
encies, make sure that its front
and back faces are properly po-
sitioned.
❒
To avoid paper misfeeds, shuf-
fle a stack of paper before set-
ting it in the tray.
ND2C0109
ND2C0109
ND2C0109
ND2C0104
ND5H05EE