Filter
Top Products
Copying
50
2
B Set the next original.
C After all originals are scanned,
press the
{
#
}
key.
The copies are delivered to the
tray.
To stop scanning
When you are using the Sort, Stack, or
Staple function, the originals are
scanned into memory.
A Press the
{
Clear/Stop
}
key.
To resume scanning
A Press the
[
No
]
key.
Scanning is resumed.
Note
❒
Scanned images in memory
are not cleared.
To clear scanned images of the
originals
A Press the
[
Yes
]
key.
Scanning is stopped with the
images cleared.
When memory reaches 0%
Scanning will be stopped if the size of
scanned image data exceeds memory
capacity.
Note
❒
There is enough memory to store
approximate 100
∼
400 originals of
A4 size. The number of originals
that can be stored in memory var-
ies depending on the memory set-
ting and types of the original.
Reference
Scanning will stop when memory
reaches 0% during sorted copying.
However, you can change this set-
ting so that all the scanned pages
are copied and delivered to the
tray first, then the machine auto-
matically continues scanning the
remaining originals. See “8.
Mem.full-AutoStrt” in
⇒
P.155
“3.
Input/Output
2
/
2
”
.
A Press the
{
Start
}
key.
The scanned pages are delivered to
the tray. Then, the image data in
memory is cleared.
B Remove the copies and continue
copying by following the instruc-
tions on the display.
ND2C0103
ND2C0104