Filter
Top Products
User Tools (Copy Features)
148
4
1. General Features
3
/
4
1. General Features
4
/
4
Menu Description
09. Slip Sheet Tray You can select a special tray for slip sheets.
Note
❒
Default:
• Machine with bypass tray:
Bypass
• Machine without bypass tray:
None
10. Duplex Priority You can choose the default Duplex setting immediately af-
ter power on or when the machine is reset.
Note
❒
Default:
1-Sided
→
2-Sided
11. Auto Reset The machine returns to its initial condition automatically
after your job is finished. The time can be set from 10 to 180
seconds.
Note
❒
Default:
60 seconds
12. Density Pattern You can customize the seven image density levels to make
them darker or lighter.
Menu Description
13. Initial Mode Set You can select the standard mode or program No.10 as the
mode to be set when modes are cleared, the machine is re-
set, or immediately after the operation switch is turned on.
Note
❒
Default:
Initial
14. Management Setting
You can change settings for user access limitation for copier functions.
Counter Reset You can check the number of copies made under each user
code. You can also reset each user code's counter to 0.
Note
❒
If more than one user code is registered, you can view all
the counters using the [
↑
Prev.
] or [
↓
Next
] key.
Clear Code/Counter You can delete all user codes or reset all counters to 0.