Filter
Top Products
Copying
52
2
Note
❒
Do not stack paper over the lim-
it mark; otherwise a skew image
or paper misfeeds might occur.
❒
If the beeper is turned off, light-
ly insert the copy paper until it
stops. See “Settings You Can
Change With The User Tools”
in the System Settings.
❒
When the platen cover is open,
set the direction of the copy pa-
per to
L
.
❒
Swing out the extender to sup-
port larger size copy paper
(larger than A4
L
, 8
1
/
2
"
×
11"
L
.
❒
Fan paper to get air between the
sheets and avoid a multi-sheet
feed.
When copying onto non-standard
size copy paper
Important
❒
You should specify the size of
copy paper to avoid paper mis-
feeds.
A Make sure the
k
indicator is
selected.
B Press the
{
#
}
key.
C Press the
[
Ppr. Size
]
key.
D Press the
[
OK
]
key.
E Enter the vertical size of the pa-
per with the number keys, then
press the
{
#
}
key.
Note
❒
To change the number en-
tered, press the
{
Clear/Stop
}
key and enter the new num-
ber.
F Enter the horizontal size of the
paper with the number keys,
then press the
[
OK
]
key.
Note
❒
To change the number en-
tered, press the
{
Clear/Stop
}
key and enter the new num-
ber.
❒
When you specify the paper
size,
!
appears on the dis-
play to indicate bypass tray
copying.
ND2C0101
ND2C0104
ND2C0104