Filter
Top Products
Other Functions
59
2
Other Functions
Energy Saver Mode—Saving
Energy
If you do not operate the machine for
a certain period after copying, or
when you press and hold the
{
Clear
Modes/Energy Saver
}
key for more than
one second, the display disappears
and the machine enters Energy Saver
mode. When you press the
{
Clear
Modes/Energy Saver
}
key again, when
the originals are set in the document
feeder, or when the platen cover or
document feeder is opened, the ma-
chine returns to the ready condition.
In Energy Saver mode, the machine
uses less electricity.
The Energy Saver mode makes a two-
step reduction in electricity: one for
the period up to the time set for Low
Power mode, the other for the period
after that time.
Note
❒
The period for which the machine
remains in Energy Saver mode (i.e.
the period until the mode is turned
off to return to the ready condi-
tion) varies with the effectiveness
of energy saving.
❒
If you press the
{
Clear Modes/Energy
Saver
}
key during the operation,
the current settings will be cleared.
Reference
See “7. Low Pwr. shift Time” “8.
Low Power Timer” of the System
Settings.
Interrupt—Temporarily
Stopping One Job to Copy
Something Else
Use this function if you wish to inter-
rupt a long copy job to make urgently
need copies.
Note
❒
The procedure for making inter-
rupt copies depends on which
kind of operation the machine is
currently carrying out.
While a document is being fed
A Press the
{
Interrupt
}
key.
The Interrupt key lights up and
copying stops.
B Remove the originals currently
set for copying, and set your orig-
inals for interrupt copying.
C Press the
{
Start
}
key.
The machine starts making your
copies.
D When you finish making inter-
rupt copies, remove your origi-
nals and copies.
E Press the
{
Interrupt
}
key again.
The Interrupt key indicator goes
out.
F Return the originals that were be-
ing copied before.
G Press the
{
Start
}
key.
The previous copy job settings will
be restored and the machine will
continue copying from where it
left off.