Filter
Top Products
Where to Put Your Machine
111
9
Reference
p.37 “Turning Off the Main Power / In the Event of Power Failure”
“Turning Off the Main Power”, About This Machine
Power Connection
The following describes power supply.
R
WARNING:
R
CAUTION:
R
CAUTION:
R
CAUTION:
R
CAUTION:
• When the main power switch is in the stand-by position, the optional anti-
condensation heaters are on. In case of emergency, unplug the machine's
power cord.
• When you unplug the power cord, the optional anti-condensation heaters
turn off.
• Make sure the plug is inserted firmly in the wall outlet.
• Voltage must not fluctuate by more than 10%.
• The wall outlet shall be installed near the machine and shall be easily accessible.
• Connect the machine only to the power source described on the inside
front cover of this manual. Connect the power cord directly into a wall
outlet and do not use an extension cord.
• Do not damage, break or make any modifications to the power cord.
Do not place heavy objects on it. Do not pull it hard nor bend it more
than necessary. These actions could cause an electric shock or fire.
• Unplug the power cord from the wall outlet before you move the machine.
While moving the machine, you should take care that the power cord will not
be damaged under the machine.
• If the power cord is damaged (exposure of the core, disconnection, etc.),
contact your service representative to change a new one. Operating the ma-
chine with a damaged power cord may cause an electric shock or fire.
• When you disconnect the power plug from the wall outlet, always pull the
plug (not the cable).
• To disconnect the power cord, pull it out by plug. Do not drag the cord itself.
Doing so may result in damage to the cord, leading to fire or electric shock.