Filter
Top Products
The Printer Function
81
6
❖ Other printing problems
If the problem cannot be solved, contact your sales or service representative.
Misfeeds occur frequently. The copy paper is wrinkled or
has been folded/creased.
Use recommended paper. Use
paper that has been stored in
the recommended tempera-
ture and humidity condition.
See “Copy Paper”, About This
Machine.
Misfeeds occur frequently. Printed paper is being used. Use recommended paper. See
“Copy Paper”, About This
Machine.
Copy paper becomes creased. The paper is damp. Use paper that has been
stored in the recommended
temperature and humidity
condition. See “Copy Paper”,
About This Machine.
Copy paper becomes creased. The paper is too thin. Use recommended paper. See
“Copy Paper”, About This
Machine.
There is considerable delay
between the print start in-
struction and actual printing.
“Off mode” might be set. The machine requires time to
warm up if it has been in “Off
mode”. Specify “Off mode” in
[System Settings], [Auto Off Tim-
er].
There is considerable delay
between the print start in-
struction and actual printing.
Processing time depends on
data volume. High volume
data, such as graphics-heavy
documents, takes longer to
process.
If the Data In indicator is
blinking, data has been re-
ceived by the machine. Wait
for a while.
Problem Cause Solution
Duplex printing is malfunc-
tioning.
Duplex printing cannot be
done with paper set in the by-
pass tray.
When using duplex printing,
make settings to use paper
from a tray other than the by-
pass tray.
Duplex printing is malfunc-
tioning.
You have loaded thick paper
specified as the paper type.
Specify another paper type.
Duplex printing is malfunc-
tioning.
Duplex printing cannot be
done with a tray for which
[Thick] has been specified as
Paper Type on the System Set-
tings menu.
Change the Paper Type set-
ting for the tray to [No Display
(Plain Paper)] on the System
Settings menu. See “System
Settings”, General Settings
Guide.
Problem Cause Solution