Filter
Top Products
When the Machine Does Not Operate As Wanted
6
1
When You Have Problems Operating the
Machine
The following chart gives explanations of common problems and messages.
If other messages appear, follow the instructions displayed.
Problem Cause Solution
“
Please wait...”
appears.
This message appears when you
turn on the operation switch or
change the toner bottle.
If the machine does not get start-
ed within 2 minutes, contact your
service representative.
“
Please wait...”
appears.
If the machine has not been in use
for a long time, it may take longer
than normal to print or start up
when switched on.
Wait for the machine to get ready.
Although the copier
screen appears when
the machine is turned
on using the main
power switch, it cannot
be switched to another
screen by pressing the
{Facsimile} or {Scan-
ner} key.
Functions other than the copier
function are not yet ready.
Wait a little longer.
The machine has just
been turned on and the
User Tools screen is
displayed, but the User
Tools menu has items
missing.
Functions other than the copier
function are not yet ready. Time
required varies by function.
Functions appear in the User
Tools menu when they become
ready for use.
Wait a little longer.
The display is difficult
to see.
Display contrast is not adjusted. Adjust the display's contrast so
that you can see the display panel
properly. See “General Features”,
General Settings Guide.
The display is off. The machine is in Energy Saver
mode.
Turn on the operation switch.
The display is off. The operation switch is turned
off.
Turn on the operation switch.
Nothing happens
when the operation
switch is turned on.
The main power switch is turned
off.
Turn on the main power switch.
The operation switch
indicator continues
blinking and does not
turn off when pressed.
The machine is communicating
with external equipment.
Check if the machine is communi-
cating with external equipment.