Filter
Top Products
Troubleshooting When Using the Printer Function
44
4
Problem with
unit. Finisher
[JobReset]
There is a problem with the finisher.
Turn the power off, and then on.
If the message appears again, contact
your sales or service representative.
Authentication
failed.
• The login user name or pass-
word entered is incorrect.
• The machine currently cannot
perform authentication.
• Check your login user name
and password.
• Contact the administrator.
Parallel I/F Er-
ror
An error has occurred in the par-
allel interface board.
Contact your service representative.
Printer Font Er-
ror.
An error has occurred in the font
settings.
Turn off the main power switch,
and back on again. If the message
appears again, contact your sales
or service representative.
Memory Overflow
Maximum capacity of RPCS, PCL
5e/6 or PostScript 3 display list
has been exceeded.
Reduce the value of [Resolution] in
the printer driver. Alternatively,
select [Font Priority] from [Memory
Usage] in [System]. See “Printer
Features”, General Settings
Guide. If this message continues
to appear after taking these steps,
reduce the data size of files sent to
the machine.
Message Cause Solution