Filter
Top Products
When the Machine Does Not Operate As Wanted
10
1
... means that these functions can be used together.
... means that you can interrupt the current job with the function keys to
proceed to a subsequent job.
... means that another job will automatically start after the current job is finished.
×... means that you must manually start another job after the current job is fin-
ished (i.e., these functions cannot be used together).
*1
You can scan a document once the preceding job documents are all scanned.
*2
During parallel reception, any subsequent job is suspended until reception is
completed.
Note
❒ Stapling cannot be used at the same time for multiple functions.
❒
You can specify the output tray where documents are delivered. For details about how to
specify the output tray for each function, see “General Features”, General Settings Guide.
❒ If the machine is capable of executing multiple functions simultaneously,
specify which function should have priority in “Print Priority”. This setting is
factory-preset to “Display mode”. For setting of Printing Priority function,
see “General Features”, General Settings Guide.
❒ While printing is in progress, scanning a document using another function
may take longer than usual.
Reference
“General Features”, General Settings Guide
Printer
Receive Data
Print
Printing
Stapling
Scanner
Using the control
panel
××
Scanning
*1
*1
*1
*1
×××
TWAIN
Scanning
××××× × ×××
Mode after you select Copy Facsimile Printer Scanner
TWAIN
Transmission Operation
Transmission
Reception
Receive Data
Print
Mode before you
select
Using the control panel
Copying
Stapling
Scanning an Original for Memory Transmission
Memory Transmission
Immediate Transmission
Memory Reception
Printing Received Data
Printing
Stapling
Using the control panel
Scanning
Scanning