Filter
Top Products
ULTRAMATRIX E-SERIES MANUAL
35
Resolution (Default: 640x480@60Hz)
Selects the resolution and scan rate of the on-screen display when no
attached computer video is present. If a computer video is shown, the
detected video resolution from the connected computer is used.
To change the resolution for a selected KVM station, select the KVM
station to change the resolution and using the left arrow key, select the
resolution field and press [Enter]. A list of supported resolutions will
display. Select the new resolution from the list and press [Enter]. The
supported resolutions are:
640x480@60Hz
640x480@72Hz
640x480@75Hz
640x480@67Hz
832x624@75Hz
1152x900@66Hz
1152x900@76Hz
Start (Default: 0)
Assigns the CPU port number the KVM station will connect to on start
up and login. 0 = no connection. To change the value, select it from
the menu and press [Enter]. Type in the CPU port number the selected
KVM station will connect to upon start up or login and press [Enter].
User (Default: User 1, 2, 3, and 4 (3 and 4 are on the 4xE model only)
This field is used to assign a specific user to a KVM station. To change
the user, first select the KVM station, then select the user field and
press [Enter]. A selection box will display a list of user names followed
by “Login”. Select the user to assign to the selected KVM station and
press [Enter]. Use the page up/down keys to display more users. If
“Login” is selected, the KVM user must login with their user ID and
assigned password to gain access to the KVM station.
The configure user, profile, and group menus all tie together to provide
access control to the computers. A group defines which computers in
the system can and cannot be accessed. This group is assigned to a
profile name. The profile defines how the computers (defined by the
group) can be accessed. The profile is assigned to a user or users.
When a user logs on to a KVM station, their assigned profile is
validated. This profile defines which group has been assigned (which
computers can be accessed), what mode the user can connect to the
computers with (view, share, control, private), the share time, scan
time, and logout time.