Filter
Top Products
ULTRAMATRIX E-SERIES MANUAL
38
Configure Profile menu
Configure Profile
Name Access Mode Share
Scan Logout
Profil 1 Group 1 Share 2
5 240
Profil 2 Group 2 Share 2
5 240
Profil 3 Group 3 Share 2
5 240
Profil 4 Group 4 Share 2
5 240
Profil 5 Group 5 Share 2
5 240
Profil 6 Group 6 Share 2
5 240
Profil 7 Group 7 Share 2
5 240
Profil 8 Group 8 Share 2
5 240
Profil 9 Group 9 Share 2
5 240
Profil10 Group10
Share 2
5 240
Profil11 Group11
Share 2
5 240
Profil12 Group12
Share 2
5 240
Profil13 Group13
Share 2
5 240
Profil14 Group14
Share 2
5 240
Profil15 Group15
Share 2
5 240
Profil16 Group16
Share 2
5 240
Use page up and page down keys to configure more profiles
Profile name, up to 8 characters
Figure 12. Configure profile menu
The configure profile menu is used to assign computer access levels,
modes, share, scan and logout times.
Name (Default: Profil x, where x = 1 to 80)
The profile name can be changed to any name up to 8 characters in
length. The name can be a specific user, a group of users within a
department, a business department, or any name that defines the
profile. To change the profile name, select the one to change and
press [Enter]. An input box will display. Type in a new profile name and
press [Enter].
Access (Default: Group x, where x = 1 to 80)
This field is used to assign each profile to a group. To change the
access for a selected profile, select the profile to change then select
the group to change and press [Enter]. A list of groups will display.
Select the group that has been set-up for the selected profile and press
[Enter]. A group is set up on the configure group menu.