Filter
Top Products
ULTRAMATRIX E-SERIES MANUAL
75
Appendix J. Rack mount
The optional rack mount kit includes the following items:
Two black anodized mounting brackets.
Four 6 - 32 x 3/8” flat head mounting screws.
To rack mount your Ultramatrix switch, attach the two rack mounting
brackets to your Unit with the short flange against the Unit using the
four screws provided. Secure the mounting brackets to the rack using
the appropriate size bolts, nuts and lock washers. Using hardware
other than that provided could cause damage to the electronics and/or
result in loss of mounting integrity. Do not over tighten the screws used
to mount the Unit to the mounting brackets.
The following general guidelines should be observed when installing
your Unit into a rack.
a). The Ultramatrix is designed to work in an ambient temperature of
0
ο
C to 45
ο
C (32
ο
F – 113
ο
F).
b). Do not block power supply vents or otherwise restrict airflow when
rack-mounting this Unit.
c). Mechanical loading of the rack should be considered to prevent
instability and possible tipping over.
d). Tighten all connectors securely and provide adequate strain relief
for all cables.
e). Provide a grounded power source to all Units. Pay special
attention to overall branch circuit load ratings before connecting
equipment to this source. Overloaded circuits are potential fire
hazards and can cause equipment failures or poor performance.
Appendix K. Rack mount illustration