Filter
Top Products
4_ NOTE: The date format may differ from each country.
You can also use the scroll button (4 or I_) to move the cursor under
the digit you want to correct and enter a new number,
4
To select "AM" or "PM" for 12-hour format, press the * or # button
or any number button,
When the cursor is not under the AM or PN indicator, pressing the
or # button immediately moves the cursor to the indicator.
You can change the dock mode to 24-hour format (e.g. 01:00 PM as
13:00). For details, see page 1.t6.
5 Press Enter when the time and date on the dispIay is correct.
When you enter a wrong number, the machine beeps and does not
proceed to the next step. If this happens, just reenter the correct
number
Changing the Clock Mode
You can set your machine to display the current time using either 12-hour
or 24-hour format.
1
2
3
4
Press Menu untiI "Machine Setup" appears on the top line of the
display.
Press the scroll button (41 or I_) until you see "Clock Node" on the
bottom line and press Enter,
The clock mode currently set for the machine displays.
Press the scroll button (41 or I_) to select the other mode and then
press Enter to save the selection.
To return to Standby mode, press Stop/Clear.
Setting the Paper Type and Size
After loading paper in the paper tray, you need to set the paper type and
size using the control panel buttons.
1 Press Menu.
The display shows "Paper Setting" on the top line and the first menu
item, "Paper Type," on the bottom line.
2 Press Enter to access the menu item.
3 Use the scroll button (_1 or I)) to fine the paper type you are using and
press Enter to save it.
4 Press the I_ button to scroll to "Paper Size" and press Enter to access
the menu item.
5 Press Enter when "Tray Paper " displays on the bottom line.
6 Use the scroll button (4 or I_) to find the paper size you are using and
press Enter to save it.
7 To return to Standby mode, press Stop/Clear.
GETTING STARTED