Filter
Top Products
ES±op Pressed3 The Stop/Clear button is Try again.
pressed during a copy or fax
operation.
EToT_er ET,'_±,=_3 The toner cartridge has run Replace with a new toiler cartridge.
out. The machine stops See page 5.7.
printing.
EToT_e_- Low] The toner cartridge is almost Take out the toner cartridge and
empty, gently shake it. By doing this, you can
temporarily reestabIish printing
operations.
Solving Problems
The following chart lists some conditions that may occur and the
recommended solutions. Fotlow the suggested solutions until the problem
is corrected. If the problem persists, please call for service.
Paper Feeding Problems
Paper is jammed during Clear the paper jam. See page 6.3.
printing.
Paper sticks together. Ensure that there is not too much paper in the paper tray. The
paper tray can hold up to 250 sheets of paper, depending on the
thickness of your paper.
Make sure that you are using the correct type of papec See
"Paper Specifications" on page A.5.
Remove paper from the paper tray and flex or fan the paper
Humid conditions may cause some paper to stick together.
Multiple sheets of paper Different types of paper may be stacked in the paper tray. Load
do not feed. the paper of onty one type, size and weight.
If multiple sheets have caused a paper jam, clear the paper jam.
See page 6.3.
Paper does not feed into
the machine.
Remove any obstructions inside the machine.
Paper has not been loaded correctly. Remove paper from the tray
and reload it correctly.
There is too much paper in the paper tray. Remove excess paper
from the tray.
The paper is too thick. Use only paper that meets the
specifications required by the machine. See "Paper Specifications"
on page A.5.
TROUBLESHOOT]NG