Paper Specifications
Overview
Your machine accepts a variety of print materials, such as cut-sheet paper, including up to 100%
recycled fiber content paper, envelopes, labels, transparencies end custom-size paper, Properties,
such as weight, composition, grain and moisture content, are important factors affecting the
machine's performance and the output quality, Paper that does not meet the guidelines outlined in
this user's guide can cause the following probIems:
• Poor print quality
• Increased paper]ams
• Premature wear on the machine,
NOTES:
• Some paper may meet alt of the guidelines in this guide and still not produce satisfactory results. This
may be the result of improper handling, unacceptable temperature and humidity levels, or other
variables over which Samsung has no control.
• Before purchasing large quantities of paper, insure the paper meets the requirements specified in this
user's guide.
CAUTION: Using paper that does not meet these specifications may cause problems, requiring repairs,
These repairs are not covered by the Samsung warranty or service agreements.
Supported Sizes of Paper
Plain paper
Letter (215.9 x 279/8.5 x 11)
A4 (210 x 297/8,27 x 11.69)
Folio (215.9 x 330,2/8.5 x 13)
Legal (215,9 x 355,6/8,5 x 14)
Executive (184.2 x 266,7/7.25 x 10,5)
B5(182 x 257/7.2 x 10)
Labels
Letter (215.9 x 279/8.5 x 11)
A4 (210 x 297/8.27 x 11.69)
Transparencies
Letter (215.9 x 279/8.5 x 1t)
A4 (210 x 297/8,27 x 11,69)
• 60 to 90 g/m 2 bond (16
to 24 Ib) for the paper
tray
• 60 to 163 g/m 2 bond (16
to 43 Ib) for the manual
feeder
120 to t50 g/m 2
138 to 146 g/m 2
• 250 sheets of 75 g/m 2
bond (20 Ib) paper for
the paper tray
• 1 sheet of paper for the
manual feeder
t sheet of paper for the
manual feeder
Capacity may vary depending on print materials' weight and thickness, and environmental conditions.
NOTE: You may experience jams when using print materials with a length of tess than 127 mm (5 in.).
For optimum performance, ensure that you are storing and handling the paper correctly. Please refer to
"Paper Storage Environment" on page A.7.
SPECIFICATIONS m