Filter
Top Products
Setting Sounds
You can control the following sounds:
• Ringer: You can adjust the ringer volume.
• Key Sound: With this option set to "On," a key tone sounds each time
any key is pressed.
• Alarm Sound: You can turn the alarm sound on or off. With this option
set to "On," an alarm tone sounds when an error occurs or fax
communication ends.
• Speaker: You can turn on or off the sounds from the telephone Iine
through the speaker, such as a dial tone or a fax tone. With this option
set to "Comm.," the speaker is on untiI the remote machine answers.
You can adjust the speaker volume level using the On Hook Dial button
or the handset.
Speaker, Ringer, Key Sound and Alarm Sound
1 Press Menu untiI "Sound/Volume" appears on the top line of the
display.
2 Press the scroll button (41 or I_) to scroll through the options. Press
Enter when you see the sound option you want.
3 Press the scroll button (41 or I_) to display the status or loudness you
want for the option you have selected.
For the ringer volume, you can select from "Off", "Low", "Med" and
"High." Setting "Off" means that the ringer turns off. The machine
works normally even if the ringer is turned off.
4 Press Enter to save the selection.
5 If necessary, repeat steps 2 through 4.
6 To return to Standby mode, press Stop/Clear.
Speaker Volume
To adjust the volume using the On Hook Dial button:
$ Press On Hook Dial. A dial tone sounds from the speaker.
2 Press the scroll button (_1 or I_) until you hear the loudness you want.
The display shows the current volume level.
3 Press Stop/Clear to save the change and return to Standby mode.
To adjust the volume using the hendset:(Fer USA only)
1 Pick up the handset. A dial tone sounds from the eerpiece.
2 Press the scroll button (, or I)) until you find the loudness you want.
You can select either "High" or "Low."
3 Press Enter to save the selection and replace the handset.
NOTE: YOUcan adjust the speaker volume onty when the telephone line is
connected.
GETTING STARTED