Filter
Top Products
3 Open the rearcoverto use the rearoutputslot.
4_ CAUTION:
• The fusingarea insidethe Fearpartofyour machine becomes hot once the
machine is turned on. Be careful when you access this area.
4 Aftercopying,closethe rearcoven
Setting the Paper Type and Size for the Manual Feeder
After loading paper in the manual feeder, you need to set the correct paper
type end size using the control panel buttons.
To set the paper size for the manual feeder:
:_ Press Menu.
The displayshows "PaperSetting"on the toplineand thefirstitem,
"PaperType,"ollthe bottom line,
2 PressEnter to accessthe menu item.
3 Use thescrollbutton(4 orI_)to findthe papertypeyou are usingand
pressEnter to save it,
4 Pressthe I_buttontoscrollto "PaperSize"and pressEnter toaccess
the menu item.
4_ NOTE: If you are using envelopes or card stocks, you don't need to set the
paper size.
5 Use the scroll button (4 or I_) to display "Manual Feed" on the bottom
line. Press Enter to access the menu item,
6 Use the scroll button (4 or I-) to find the paper size you ere using and
press Enter to save it.
7 To return to Standby mode, press Step/Clear,
BASIC FUNCTIONS