Filter
Top Products
Sending a Fax Automatically
1 Load the document(s) face down into the ADF
For details about loading a document, see page 2.2.
2 Adjust the document resolution to suit your fax needs. See page 2.3.
if you need to change the darkness, see page t.20.
3 Enter the remote fax phone number using the number keypad.
You can use the one-touch keypad or speed or group dial numbers. For
details about storing a number, see page 2.16.
4 Press Start Copy/Fax.
The number is dialed end then the machine begins sending the fax
when the remote fax machine is ready.
,_ NOTE: When you want to cancel the fax job, press Stop/Clear at any time
whiIe sending the fax.
Sending a Fax Manually
1 Load the document(s) face down into the ADE
For detaits about loading a document, see page 2.2.
2 Adjust the document resolution to suit your fax needs, See page 2.3.
If you need to change the darkness, see page 1.20,
3 Press On Hook Dial or lift the handset. You hear a dial tone,
4 Enter the remote fax machine's fax number using the number keypad.
You can use the one-touch keypad or speed or group dial numbers, For
details about storing a number, see page 2.16,
5 When you hear e high-pitched fax signal from the remote fax machine,
press Start Copy/Fax,
4_ NOTE: When you want to cancel the fax job, press Stop/Clear at any time
whiIe sending the fax.
BASIC FUNCTIONS