Filter
Top Products
Using the Save Hodes
Toner Save Mode
Toner Save mode allows your machine to use less toner on each page.
Activating this mode extends the life of the toner cartridge longer than
normal, but it reduces the print quality.
To turn the toner save mode on or off, press Toner Save.
• If the button backlight is on, the mode is active and the machine uses
less toner when printing a document.
• If the button backlight is off, the mode is deactivated and the machine
prints with the normal quality.
Toll Save Hode
Using the Toll Save button on the control panel, you can quickty set your
machine to send the document(s) stored in the memory during the preset
time slot, when the call charge is lowered. This Toll Save mode helps you to
take advantage of lower tong distance rates at night, for example.
NOTE: The toll-saving time slot may vary depending on your contract with
along distance phone company.
To turn the toll save mode on:
1 Press Tell Save. The button backlight turns on.
2 Press Enter when "Start Time" dispIays on the bottom line.
3 Enter the time when your machine starts sending toll save faxes, using
the number keypad.
To select "AN" or "PM" for 12-hour format, press the -)(-or # button
or any number button.
4 Press Enter when the starting time on the display is correct.
5 Press the scroll button (< or I_) to display "End Time" and press
Enter.
6 Enter the time when the toll save transmission ends, using the number
keypad.
7 Press Enter to save the setting.
8 To return to Standby Node, press Stop/Clear.
Once Toil Save mode is activated, your machine stores all of the documents
to be faxed into the memory and sends them at the programed time.
To turn Toll Save mode off, press Tell Save again. The button backlight
turns off and the mode is deactivated.
NOTE: Once the toll-saving time is set, the Toll Save button allows you to only
enable or disabte the toil save mode. To change the time setting, use the Toll
Save item in the Advanced Fax menu. See page 4.5.
GETTING STARTED