Filter
Top Products
RCV Forward
TollSave
Junk Fax Setup
Secure Receive
Prefix Dial No.
Stamp RCV Name
ECM Mode
(Error Correction Mode)
You can set your machine to forward incoming faxes to another
fax number during a specified period of time. When a fax arrives
at your machine, it is stored in the memory. Then, the machine
dials the fax number that you have specified and sends the fax.
SelectOffto turnthisfeatureoff.
SelectOn to turnthisfeatureon.You can setthe faxnumber to
which faxes are forwarded. Then, you can enter the starting time
and/or the ending time. The Print Local Copy option allows you
to set the machine to print the fax, if fax forwarding is completed
without any error.
You can set your machine to store your faxes into the memory
and send them at the specified tolI-saving time. For details about
Toll Save mode, see page t.18.
Select Off to turn this feature off.
Select On to turn this feature on. You can set the starting time
and/or the ending time for Toll Save mode.
Using the Junk Fax Barrier feature, the system will not accept
faxes sent from remote stations of which their numbers are
stored in the memory as junk fax numbers. This feature is useful
for blocking any unwanted faxes.
Select Off to turn the feature off. Anybody can send you a fax.
Select On to turn the feature on. You can set up to 10 fax
numbers as junk fax numbers using the Set option. This feature
recognize the last 6 digits of the fax number set as a remote fax
machine's tD. After storing numbers, you do not receive any
faxes from the registered stations. To delete all the junk fax
numbers, use the All Delete option.
You can keep your received faxes from being accessed by
unauthorized peopIe.
For further details about setting this mode, see page 4.2.
You can set a prefix diat number of up to five digits. This number
dials before any automatic dial number is started, it is useful for
accessing the PABX exchange.
This option allows the machine to automatically print the page
number, and the date and time of the reception at the bottom of
each page of a received document.
Select Off to turn this feature off.
Select On to turn this feature on.
Error Correction Mode helps with poor line quality and makes
sure any fax you send are sent smoothly to any other ECM-
equipped fax machine. [f the line quality is poor, it takes more
time to send a fax when you are using the ECM.
Select Offto turn this feature off.
Select On to turn this feature on.
ADDITIONAL FEATURES m