Smart Technologies Not found Whiteboard Accessories User Manual


 
4 | CHAPTER 1 – ABOUT YOUR SMART BOARD 685IX INTERACTIVE
WHITEBOARD SYSTEM
Part No. 99-00984-20 REV A0
Remote management via network through an RJ45 jack
OR
Remote management via a serial RS-232 interface
Self-protection timer for a hot re-strike of the projector lamp
Protected cable routing through the projector housing, a cable cover and wire
management bundle to prevent tampering and clutter
Cleaning cloth for use on the projector lens and system mirror
A secure mounting and installation system that includes:
Two projector padlock loops
Mounting hardware for solid masonry or framed wall installations
Templates and instructions for positioning the system safely
In addition, the UX60 projector system includes a fully labeled connection panel,
which includes the following connection receptacles for the ECP harness cable and
your source inputs:
The ECP harness cable connection receptacles that include:
A composite video input (RCA jack) and associated dual-channel audio input
(two RCA jacks)
A 4-pin powered mini-DIN connector and 7-pin mini-DIN connector
A 3-pin mini-DIN connector
S-video input and associated dual-channel audio input (two RCA jacks)
HDMI digital interface
Two HD-DB15 (VGA) inputs and associated audio input (3.5 mm jack) and one
HD-DB15 (VGA) output and associated audio output (3.5 mm jack) with additional
interface support for Component YPbPr and Component YCbCr inputs with
proper adapters (not included)
RJ45 cable for ethernet connections
RS-232 connector
USB B receptacle for service access