Smart Technologies Not found Whiteboard Accessories User Manual


 
iv | INTRODUCTION – IMPORTANT INFORMATION
Part No. 99-00984-20 REV A0
If the lamp has shattered or burst:
Call an authorized SMART reseller
for instructions. Do not attempt to
replace the lamp.
Do not touch the glass fragments because they can cause injury.
Leave and then ventilate the area where the lamp shattered or burst.
Wash your hands thoroughly if you have come into contact with
lamp debris.
Thoroughly clean the area around the projector, and discard any edible
items placed in that area because they could be contaminated.
Replacing the lamp in a wall-mounted projector can result in a fall or injury.
Use caution when climbing a ladder, or remove the projector from the wall-
mounting bracket to replace the lamp.
Uncovering the lamp while the projector is mounted on the wall-mounting
bracket can lead to product damage or personal injury from falling pieces
of glass if the lamp is broken.
When replacing the projector lamp:
Turn off the projector and wait 30 minutes for the lamp to cool
completely (or before removing the projector from the wall-mounting
bracket, if necessary).
Do not remove any screws other than those specified in the lamp
replacement instructions.
Wear protective eyewear while changing the lamp. Failure to do so can
cause injury or loss of eyesight if the lamp shatters or bursts.
Use only replacement lamps approved by SMART Technologies. Contact
your authorized SMART reseller
for replacement parts.
Never replace the lamp assembly with a previously-used lamp assembly.
To prevent premature lamp failure or exposure to mercury, always handle
the fragile lamp assembly with care. Use gloves when touching the lamp.
Do not touch the lamp with your fingers.
Recycle or dispose of the lamp as hazardous waste, in accordance with
local regulations.
When returning the projector to the wall-mounting bracket, replace all of the
screws you removed when you removed the projector. Failure to do so
can result in the projector falling from the boom resulting in injury or
equipment damage.