Filter
Top Products
Part No. 99-00984-20 REV A0
43 | CHAPTER 5 – MAINTAINING AND TROUBLESHOOTING YOUR SMART BOARD
685ix INTERACTIVE WHITEBOARD SYSTEM
4. Pull the lamp cover forward
and remove it from the
projector. Put the lamp cover
in a safe place.
TIP
If the cover is difficult to
remove, insert a flat
screwdriver or small coin
into the slot on the bottom
of the lamp cover to gently
pry the cover open.
5. Use a Phillips® screwdriver
to loosen the two captive
screws from the bottom of
the lamp module.
NOTE
Captive screws can’t be
removed, but they must
be loose. Don’t try to
remove the screws.
6. Use the handle on bottom of
the lamp module to slide out
the lamp and remove it from
the projector.