Filter
Top Products
24 | CHAPTER 4 – INTEGRATING OTHER DEVICES TO YOUR INTERACTIVE
WHITEBOARD SYSTEM
Part No. 99-00984-20 REV A0
Attaching Sources and Outputs to Your UX60 Projector
Follow these instructions if you have a peripheral device to connect to your
interactive whiteboard system, such as powered speakers, a network connection, a
permanently installed device using an HDMI interface, S-video connectors or
HD-DB15 connectors.
NOTE
Measure the distance between your projector and the peripheral you want to
connect. Make sure each cable is long enough, has plenty of slack and can be
placed safely in your room without presenting a tripping hazard.
To access the UX60
projector’s connection
panel
1. Turn off your SMART Board 685ix interactive whiteboard system.
2. Remove the four screws on either side of the projector’s wall-mounting bracket
cable covers.
3. Remove the cable covers by gently pulling on their sides, away from each other.