Filter
Top Products
Part No. 99-00984-20 REV A0
41 | CHAPTER 5 – MAINTAINING AND TROUBLESHOOTING YOUR SMART BOARD
685ix INTERACTIVE WHITEBOARD SYSTEM
3. Install the pen tray.
4. Insert the prong end of the security cable into the security slot, and then complete
the pen tray installation.
Because you can remove the pen tray without tools, you may want to securely attach
it to its brackets.
To secure the pen tray to
the pen tray brackets
Insert two No. 8/M4 screws (not included) into the holes shown in the following
illustration.
NOTE
Older pen trays don’t have this feature.
Replacing the UX60 Projector’s Lamp Module
Eventually the lamp module will dim, and a message will appear reminding you to
replace the lamp. Make sure you have a replacement projector lamp before
proceeding with the following instructions.
WARNINGS
• This projector detects its remaining lamp life. Replace the lamp when a lamp
life warning message appears. If you continue to use the projector after the
replacement message appears, the lamp can shatter or burst, scattering
glass throughout the projector.
• If the lamp has shattered or burst:
– Call an authorized SMART reseller
for instructions. Do not attempt to
replace the lamp.
– Do not touch the glass fragments because they can cause injury.
– Leave and then ventilate the area where the lamp shattered or burst.
Screw Location