Filter
Top Products
System Configuration
5-44
If the RTS threshold is set to 0, the access point never sends RTS
signals. If set to 2347, the access point always sends RTS
signals. If set to any other value, and the packet size equals or
exceeds the RTS threshold, the RTS/CTS (Request to Send /
Clear to Send) mechanism will be enabled.
The access points contending for the medium may not be aware
of each other. The RTS/CTS mechanism can solve this “Hidden
Node Problem.” (Range: 0-2347 bytes: Default: 2347 bytes)
CLI Commands for the 802.11a Wireless Interface – From the
global configuration mode, enter the interface wireless a
command to access the 802.11a radio interface. Set the interface
SSID using the ssid command and, if required, configure a name
for the interface using the description command. Use the turbo
command to enable this feature before setting the radio channel
with the channel command. Set any other parameters as
required. To view the current 802.11a radio settings, use the
show interface wireless a command.
SMC-AP(config)#interface wireless a 6-68
Enter Wireless configuration commands, one per line.
SMC-AP(if-wireless a)#description RD-AP#3 6-75
SMC-AP(if-wireless a)#ssid r&d 6-79
SMC-AP(if-wireless a)#turbo 6-78
SMC-AP(if-wireless a)#channel 42 6-77
SMC-AP(if-wireless a)#ssid-broadcast 6-75
SMC-AP(if-wireless a)#transmit-power full 6-87
SMC-AP(if-wireless a)#speed 9 6-76
SMC-AP(if-wireless g)#max-association 32 6-88
SMC-AP(if-wireless a)#beacon-interval 150 6-79
SMC-AP(if-wireless a)#dtim-period 5 6-80
SMC-AP(if-wireless a)#fragmentation-length 512 6-81
SMC-AP(if-wireless a)#rts-threshold 256 6-82
SMC-AP(if-wireless a)#end