Filter
Top Products
Initial Configuration
4-8
• 802.11b/g
802.11g Radio Channel: Set the operating radio
channel number. (Range: 1-11; Default: 11)
Note: Available channel settings are limited by local
regulations which determine which channels are
available. (See “Maximum Channels” on page C-1.)
3. IP Configuration – Either enable or disable Dynamic
Host Configuration Protocol (DHCP) for automatic IP
configuration. If you disable DHCP, then manually enter
the IP address and subnet mask. If a management
station exists on another network segment, then you
must enter the IP address for a gateway that can route traffic
between these segments. Then enter the IP address for the
primary and secondary Domain Name Servers (DNS) servers
to be used for host-name to IP address resolution.
DHCP Client – With DHCP Client enabled, the IP address,
subnet mask and default gateway can be dynamically