Filter
Top Products
Flash/File Commands
6-43
server is 255 characters or 32 characters for files on the
access point. (Valid characters: A-Z, a-z, 0-9, “.”, “-”, “_”)
• Due to the size limit of the flash memory, the access point
supports only two operation code files.
• The system configuration file must be named “syscfg” in all
copy commands.
Example
The following example shows how to upload the configuration
settings to a file on the TFTP server:
The following example shows how to download a configuration
file:
delete
This command deletes a file or image.
Syntax
delete filename
filename - Name of the configuration file or image name.
Default Setting
None
SMC-AP#copy config tftp
TFTP Source file name:syscfg
TFTP Server IP:192.168.1.19
SMC-AP#
SMC-AP#copy tftp file
1. Application image
2. Config file
3. Boot block image
Select the type of download<1,2,3>: [1]:2
TFTP Source file name:syscfg
TFTP Server IP:192.168.1.19
SMC-AP#