Filter
Top Products
Troubleshooting
A-3
4. If you forgot or lost the password:
• Set the access point to its default configuration by
pressing the reset button on the back panel for 5 seconds
or more. Then use the default user name “admin” with the
password “smcadmin” to access the management
interface.
5. If all other recovery measures fail, and the access point is still
not functioning properly, take any of these steps:
• Reset the access point’s hardware using the console
interface, web interface, or through a power reset.
• Reset the access point to its default configuration by
pressing the reset button on the back panel for 5 seconds
or more. Then use the default user name “admin” with the
password “smcadmin” to access the management
interface.