Filter
Top Products
Status Information
5-69
• Access point was set to “Shared Key Authentication,” but a
client sent an authentication frame for “Open System.”
• WEP keys do not match: When the access point uses “Shared
Key Authentication,” but the key used by client and access
point are not the same, the frame will be decrypted incorrectly,
using the wrong algorithm and sequence number.
CLI Commands for Displaying the Event Logs – From the global
configuration mode, use the show logging command.
Note: Log messages are not displayed in the CLI.
SMC-AP#show logging 6-27
Logging Information
============================================
Syslog State : Enabled
Logging Host State : Enabled
Logging Console State : Enabled
Server Domain name/IP : 192.168.1.19
Logging Level : Alert
Logging Facility Type : 16
=============================================
SMC-AP#