Filter
Top Products
Command Line Interface
6-38
Related Commands
snmp-server host (page 6-38)
snmp-server host
This command specifies the recipient of an SNMP notification.
Use the no form to remove the specified host.
Syntax
snmp-server host <host_ip_address | host_name>
<community-string>
no snmp-server host
• host_ip_address - IP of the host (the targeted recipient).
• host_name - Name of the host. (Range: 1-20 characters)
• community-string - Password-like community string sent
with the notification operation. Although you can set this
string using the snmp-server host command by itself, we
recommend that you define this string using the
snmp-server community command prior to using the
snmp-server host command. (Maximum length: 23
characters)
Default Setting
Host Address: None
Community String: public
Command Mode
Global Configuration
Command Usage
The snmp-server host command is used in conjunction with
the snmp-server enable server command to enable SNMP
notifications.