Filter
Top Products
Command Line Interface
6-40
show snmp
This command displays the SNMP configuration settings.
Command Mode
Exec
Example
Flash/File Commands
These commands are used to manage the system code or
configuration files.
SMC-AP#show snmp
SNMP Information
============================================
Service State : Enable
Community (ro) : *****
Community (rw) : *****
Location : WC-19
Contact : Paul
Traps : Enabled
Host Name/IP : 10.1.19.23
Trap Community : *****
=============================================
SMC-AP#
Command Function Mode Page
bootfile Specifies the file or image used to
start up the system
GC 6-41
copy Copies a code image or configuration
between flash memory and a FTP/
TFTP server
Exec 6-42
delete Deletes a file or code image Exec 6-43
dir Displays a list of files in flash memory Exec 6-44