SMC Networks SMC2555W-AG Network Router User Manual


 
Command Line Interface
6-42
copy
This command copies a boot file, code image, or configuration file
between the access point’s flash memory and a FTP/TFTP
server. When you save the configuration settings to a file on a
FTP/TFTP server, that file can later be downloaded to the access
point to restore system operation. The success of the file transfer
depends on the accessibility of the FTP/TFTP server and the
quality of the network connection.
Syntax
copy <ftp | tftp> file
copy config <ftp | tftp>
ftp - Keyword that allows you to copy to/from an FTP server.
tftp - Keyword that allows you to copy to/from a TFTP
server.
file - Keyword that allows you to copy to/from a flash
memory file.
config - Keyword that allows you to upload the configuration
file from flash memory.
Default Setting
None
Command Mode
Exec
Command Usage
The system prompts for data required to complete the copy
command.
Only a configuration file can be uploaded to an FTP/TFTP
server, but every type of file can be downloaded to the
access point.
The destination file name should not contain slashes (\ or /),
the leading letter of the file name should not be a period (.),
and the maximum length for file names on the FTP/TFTP