Filter
Top Products
System Management Commands
6-17
logging console Initiates logging of error messages to
the console
GC 6-25
logging level Defines the minimum severity level for
event logging
GC 6-26
logging
facility-type
Sets the facility type for remote logging
of syslog messages
GC 6-27
show logging Displays the state of logging Exec 6-27
System Clock Sets the system clock via an NTP/
SNTP server
sntp-server ip Specifies one or more time servers GC 6-28
sntp-server
enable
Accepts time from the specified time
servers
GC 6-29
sntp-server
date-time
Manually sets the system date and
time
GC 6-30
sntp-server
daylight-saving
Sets the start and end dates for
daylight savings time
GC 6-31
sntp-server
timezone
Sets the time zone for the access
point’s internal clock
GC 6-32
show sntp Shows current SNTP configuration
settings
Exec 6-32
System Status Displays system configuration and
version information
show system Displays system information Exec 6-33
show version Displays version information for the
system
Exec 6-34
Command Function Mode Page