Filter
Top Products
Command Line Interface
6-46
radius-server address
This command specifies the primary and secondary RADIUS
servers.
Syntax
radius-server address [secondary] <host_ip_address |
host_name>
• secondary - Secondary server.
• host_ip_address - IP address of server.
• host_name - Host name of server. (Range: 1-20 characters)
Default Setting
None
Command Mode
Global Configuration
Example
radius-server port
This command sets the RADIUS server network port.
Syntax
radius-server [secondary] port <port_number>
• secondary - Secondary server.
• port_number - RADIUS server UDP port used for
authentication messages. (Range: 1024-65535)
Default Setting
1812
Command Mode
Global Configuration
SMC-AP(config)#radius-server address 192.168.1.25
SMC-AP(config)#